Merck 109163.2500 Wijs solution

for determination of the iodine number c(ICl) = 0.1 mol/l Titripur

Sipariş ve sorularınız için:

Email                        turalab@turalab.com

Tel / Whatsapp        0 532 165 34 85

 

Ambalaj Miktarı: 2,5 Lt

(2024 güncel fiyat)

Ambalaj Fiyatı: 260,00 € + %20 KDV

 

Ödeme tarihindeki T.C.M.B. döviz satış kurundan Türk Lirasına çevrilerek tahsil ve fatura edilir.
Kargo ile sevk olur, kargo ücreti alıcıya aittir.

Ürün Fiyatı: 260,00 €

Ürün Özellikleri

Description
Catalogue Number 109163
Synonyms Iodine solution acc. to Wijs

Merck 109163.2500 | Wijs solution c(ICl) = 0.1 mol/l 2,5L

Product Information
HS Code 3822 00 00

Physicochemical Information
Density 1.06 g/cm3 (20 °C)
Flash point 40 °C
pH value < – 1 (H₂O, 20 °C)
Solubility (20 °C) (decomposition),soluble

Safety Information according to GHS
Hazard Pictogram(s)

Hazard Statement(s) H226: Flammable liquid and vapour.
H314: Causes severe skin burns and eye damage.
Precautionary Statement(s) P210: Keep away from heat.
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Signal Word Danger
Storage class 3 Flammable liquids
WGK WGK 1 slightly water endangering
Disposal 12
Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.

Safety Information
Hazard Symbols Corrosive
Categories of danger flammable, corrosive
R Phrase R 10-35
Flammable.Causes severe burns.
S Phrase S 26-36/37/39-45
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Storage and Shipping Information
Storage Store at +15°C to +25°C.

Transport Information
Declaration (railroad and road) ADR, RID UN 2789 , 8 (3), II
Declaration (transport by air) IATA-DGR UN 2789 , 8 (3), II
Declaration (transport by sea) IMDG-Code UN 2789 , 8 (3), II, Segregation Group: 1 (Acids)

Specifications
Specifications
Amount-of-substance concentration 0.1000 mol/l
The concentration of this volumetric solution was determined with sodium thiosulfate standard solution (article number 1.09147) standardized against volumetric standard potassium iodate (article number 1.02404). The determined titer at 20°C was 1.000 with an expanded measurement uncertainty of ± 0.004 (k=2 coverage factor for 95% coverage probability). The certified value is traceable to primary standard NIST SRM 136f (NIST: National Institute of Standards and Technology, USA) by means of volumetric standard potassium iodate, measured in the accredited calibration laboratory of Merck KGaA, Darmstadt, Germany in accordance to DIN EN ISO/IEC 17025.

wijs solution iodine monochloride wijs solüsyonu

1.09163.2500

1091632500

Laboratuvar kimyasalları

M109163.2500

Wijs çözeltisi İyot sayısı c (ICI) = 0.1 mol / l Titripur® tayini için

Ürün Özellikleri:

2,5 litre 260,00 € + %20 KDV